🔍🔍
🔍
🔍
🔍
🔍
🔍
🔍
🔍SwiftPress Vacuumformer
From $100
The SwiftPress was the first adjustable, non-membrane vacuum former specifically designed for use in the holster industry. By eliminating the silicone membrane found on other vacuum formers, the SwiftPress produces increased definition in the formed parts, and allows for drastically shorter cooling cycles.
—
Please note: SwiftPress and SwiftPress frames do not qualify for free shipping. All US SwiftPress orders will ship via UPS Ground
Returns
Need to make a return, cancel an order or request a replacement? Submit a request.
If you don’t like your new holster, you may return it within 30 days, in “like new” condition, for a full refund, minus shipping.
All returns must be undamaged and must include all the original hardware.
Warranty
Henry Holsters products are covered by a Limited Lifetime Warranty. If your holster fails it will be repaired or replaced at no charge unless it appears to have been deliberately destroyed. So if you decide to cut your holster apart with a Dremel and then send it back, it won’t be covered.
SwiftPress and SwiftPress frames do not qualify for free shipping.
All US SwiftPress orders will ship via UPS Ground
*FREE SHIPPING $100 (lower 48 states only)
Additional Information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Press Package | Full Kit ($425), Adjustable frame ONLY ($100), Full kit (slight cosmetic blemish) ($375) |
The SwiftPress was the first adjustable, non-membrane vacuum former specifically designed for use in the holster industry. By eliminating the silicone membrane found on other vacuum formers, the SwiftPress produces increased definition in the formed parts, and allows for drastically shorter cooling cycles. The press is able to be plumbed directly to a vacuum pump without valves or surge tanks, and a pump with a capacity of 5cfm or more is recommended.
Using the SwiftPress
The sliding frame is adjusted to match the mold size by loosening one screw at each corner and then scaling the frame. The press comes equipped with a Push-to-Connect fitting for 1/2 OD vacuum line, which is also provided.
The forming deck measures 15x20in, with a max workable area of 14x19in. Placing multiple molds on the former for each cycle increases output, and also decreases plastic waste by allowing the molds to share edges.
Rubber feet on the underside allow easy access to the plumbing fitting, and the press can be unplugged for easy storage, freeing up valuable bench space when not in use.
Mold Setup
Included with the SwiftPress
Each press also comes with a roll of permeable Breather Mesh that should be cut down and placed under each mold to ensure even vacuum distribution to all the edges of the mold.
SwiftPress is ideal for medium to high-volume production of identical parts using split molds. Many customers find that a SwiftPress is an excellent complement to a membrane former, allowing them to run standard production items quickly on the Swift, while using the membrane former for custom printed plastics, curved-jig OWBs, and hybrid shells.
Each full kit includes the following components:
- A machined aluminum deck with a push-to-connect fitting installed.
- An adjustable frame made of 1 inch extruded aluminum.
- A 1/2NPT to Push-to-Connect fitting that can be installed on a Robinair 15800 pump. (the pump we recommend.)
- A length of vacuum rated line
- A roll of permeable breather mesh for you to cut up and place under your molds.
Warranty and Returns:
- The SwiftPress is covered by a 30 day return policy. Product must be in “like new” condition (no dings, dents, scratches). Please contact Henry Holsters before returning any product.
Related products
TurboDrop OWB Drop Hanger
From $45
- Login
- Sign Up
Your Wishlist is Empty
Guest favorites are only saved to your device for 7 days, or until you clear your cache. Sign in or create an account to hang on to your picks.
Holster Fit Guide for the Ember
| Holster Model | Fits | Does not fit |
|---|---|---|
| CZ P10C (TLR7 HL-X) | P10C, P10C OR (optics ready), P10C OR SR (optics ready, threaded barrel), P10C Ported with Streamlight TLR7 HL-X **MAY fit P10F (full size) and P10S (subcompact) | P07, P09, P09 Compact, CZ 75, CZ P01 TLR-8, TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub |
| Glock® 17/19/23 (TLR7 HL-X) | G17, G19, G19x, G22 (gen 3-4), G23 (gen 3-4), G31, G32, G33, G34,* G35 (gen 3-4),* G45 or Shadow Systems, G47 G49 w/ TLR-7 HLX, TLR-7, TLR-7A, TLR-7X | G20, G21, G22 gen5, G23 gen5, G26, G27, G35 gen 5, G36, G37, G38, G39, G40, G43, G43x, G48, Polymer 80, TLR-8, TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub |
| Glock® 48/43x | G43x MOS, G48 MOS, G48, Shadow Systems CR920 w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "GL" | G42, G43, G43x non-MOS, G48 non-MOS Shadow Systems CR920XP TLR-7, TLR-7A, TLR-7 HLX, TLR-8 |
| M&P 2.0 (TLR7-HLX) | M&P 1.0, M&P 2.0, M&P 2.0c, with TLR7, 7A, 7X or 7 HLX, with or without thumb safety. | Metal framed M&P, M&P .45, M&P .45c, M&P 2.0 Carry Comp |
| M&P Shield X | Shield X w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "1913s" | Shield 1.0, 2.0, Plus, or any other variant of the TLR7 Sub, also will not fit TLR7A/X/HLX |
| P365 Mischief Machine | P365 Mischief Machine metal frame w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "1913" and Henry Holsters proprietary Xmacro rail key for TLR-7 Sub (included) | Other metal or polymer frame P365s TLR-7, TLR-7A, TLR-7 HLX, TLR-8 or TLR-7 Sub marked "Sig" |
| Shadow Systems CR920XP | Shadow Systems CR920XP, CR920 w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "GL" | G42, G43, G43x non-MOS, G48 non-MOS TLR-7, TLR-7A, TLR-7 HLX, TLR-8 |
| Sig P365/P365XL (*NOT P365 .380*) | P365, P365X, P365XL, P365 SAS, P365XL Comp Rose, P365XL Spectre Comp, Wilson Combat P365 and P365XL Grip modules w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "Sig" | P365 .380, P365Xmacro, P365 Fuse, P322, AXG, Icarus Precision, Mischief Machine TLR-7, TLR-7A, TLR-7 HLX, TLR-8 |
| Sig P365 Fuse (TLR7 Sub) | P365 Fuse P365 Xmacro w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "1913" and Henry Holsters proprietary Xmacro rail key for TLR-7 Sub (included) | P365, P365X, P365XL, P365 SAS, P365XL Comp Rose, P365XL Spectre Comp AXG TLR-7, TLR-7A, TLR-7 HLX, TLR-8 or TLR-7 Sub marked "Sig" |
| Sig P365 Fuse (TLR7 HL-X) | P365 Fuse P365 Xmacro w/ TLR-7, TLR-7A, TLR-7X, TLR-7 HLX | P365, P365X, P365XL, P365 SAS, P365XL Comp Rose, P365XL Spectre Comp AXG Streamlight TLR-7 sub, TLR-7 X sub, or TLR-7 HLX Sub |
| Sig P365-XMACRO | Sig P365 Xmacro, Sig P365 Fuse,* Wilson Combat Xmacro w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "1913" and Henry Holsters proprietary Xmacro rail key for TLR-7 Sub (included) | P365, P365X, P365XL, P365 Fuse, P365 SAS, P365XL Comp Rose, P365XL Spectre Comp P365 Xmacro AXG, Icarus Precision, Mischief Machine, Shalotek, Sharps Bros, Any other aftermarket metal grip modules Wilson Combat P365 or P365XL grip modules TLR-7, TLR-7A, TLR-7 HLX, TLR-8 or TLR-7 Sub marked "Sig" TLR-7, TLR-7A, TLR-8 or TLR-7 Sub marked "Sig" |
| Sig P365 AXG Legion (Gen1) | Sig P365 AXG Legion (Gen1 Only) | Gen2 Sig P365 AXG Legion (see page for details) |
| Sig P365 AXG Legion (Gen2) | Sig P365 AXG Legion (Gen2 Only) | Gen1 Sig P365 AXG Legion (see page for details) |
| Springfield Hellcat | Springfield Hellcat, Hellcat OSP, Hellcat RDP w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "SA", “HCAT” or "1913 OS" | Springfield Hellcat Pro, Hellcat Pro OSP TLR-7, TLR-7A, TLR-7 HLX, TLR-8 |
| Springfield Hellcat Pro | Springfield Hellcat Pro, Hellcat Pro OSP, Hellcat Pro OSP COMP* w/ TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub marked "SA", “HCAT” or "1913 OS" | Springfield Hellcat (non-Pro) TLR-7 Sub marked "1913," TLR-7, TLR-7A, TLR-7 HLX, TLR-8 |
| Springfield Prodigy | Prodigy 4.25in, Prodigy 5in w/ TLR-7 HL-X | - |
| Staccato C2 / P | Staccato C2, Staccato P w/ TLR-7 HL-X | Staccato HD P4 or P4.5, Staccato 2024 CS |
| Walther PDP (TLR7 HL-X) | PDP Compact 4in, PDP 4.5in, PDP-F with Streamlight TLR7 HL-X 1913-1 Rail Key | PDP Steel Frame, PPQ, PPQ M2, Q5 Match TLR-8, TLR-7 Sub, TLR-7X Sub, TLR-7 HLX Sub |
Holster Fit Guide for the Cipher
| Holster Model | Fits | Does not fit |
|---|---|---|
| Beretta PX4 | Beretta PX4 | Beretta PX4 Compact |
| Beretta PX4 Compact | Beretta PX4 Compact | Beretta PX4 |
| Canik METE SF | Canik METE SF | MC9 Prime MC9L MC9LS MC9 MC9 CA SFT SFX SFT Pro SFX Pro |
| Canik METE MC9 Prime | MC9 Prime, Prime Radian | MC9, MC9L, MC9LS |
| CZ P09C Nocturne | CZ P09C Nocturne, CZ P07 (with heavy retention) | P10c, P10s, P10f, P01, Shadow 2, Shadow 2 Compact, Shadow 2 Carry |
| CZ P10C | CZ P10c, CZ P10s, CZ P10sc, CZ P10f (muzzle will extend beyond the holster) | Any metal framed CZ P01 Shadow 2, etc |
| CZ Shadow 2 Compact | CZ Shadow 2 Compact | Shadow 2 Full Size, P10c, P09, P09c, P07, P01 |
| FN Reflex XL | FN Reflex XL MRD FN Reflex FN Reflex MRD | FN509 FNS FNX |
| Glock® 19 | G19 G19x G23 (gen 3-4) G45 G17* G49* G22 (gen 3-4)* | G26 G27 G23 (gen 5) G22 (Gen 5) Any Glock in 10mm or .45 |
| Glock® 48 | G43, G43x, G43x MOS, G48, G48 MOS | G42, G36, Shadow Systems, Polymer 80 |
| HK CC9 | CC9 | - |
| HK P30L | P30 P30L P30SK | - |
| HK VP9 | VP9 VP9SK VP9A1K VP9A1F VP9L OR* VP9 Match* VP9 Tactical OR* | VP40 |
| M&P 2.0 | M&P 1.0, M&P 1.0c, M&P 2.0, M&P 2.0c (with or without thumb safety) | Metal framed M&P M&P .45 M&P .45c M&P 2.0 Carry Comp |
| M&P Shield 1.0/2.0/Plus | Shield 1.0 in, 9mm/.40S&W Shield 2.0 (with or without thumb safety) Shield Plus (with or without thumb safety) | M&P Shield X Any Shield w/ integrated laser |
| M&P Shield EZ 380 | M&P Shield EZ 380 | M&P Shield EZ 9 M&P Bodyguard 380 Any M&P Shield in 9mm or .40 |
| Ruger RXM | Ruger RXM | - |
| Shadow Systems CR920XP | Shadow Systems CR920XP | - |
| Sig P365 XL | P365, P365X, P365XL, P365 SAS, P365XL Comp Rose, P365XL Spectre Comp, Wilson Combat P365 and P365XL Grip modules | P365 .380, P365X-Macro, P322, Icarus Precision, Mischief Machine |
| Sig P365 Fuse | Sig P365 Fuse Sig P365 X Macro | P365 P365X P365 XL P365 AXG Legion Any other after-market frame (Icarus Precision, Mischief Machine) |
| Sig P365 XMACRO | Sig P365 XMACRO Wilson Combat XMACRO Sig P365 Fuse* | P365 P365X P365 XL P365 AXG Legion Any other after-market frame (Icarus Precision, Mischief Machine) |
| Sig P365 AXG Legion (Gen1) | P365 AXG Legion (Gen1) | P365 AXG Legion (Gen2) |
| Sig P365 AXG Legion (Gen2) | P365 AXG Legion (Gen2) | P365 AXG Legion (Gen1) |
| Springfield Echelon | Springfield Echelon Full Size Springfield Echelon Compact | Everything Else |
| Springfield Hellcat Pro | Hellcat Pro | |
| Springfield Hellcat RDP | Hellcat RDP (with or without manual safety) Hellcat Hellcat OSP | Hellcat Pro |
| Springfield 1911 DS Prodigy (5.0in) | Springfield 1911 DS Prodigy 5.0in AOS Springfield 1911 DS Prodigy 4.25in AOS | Other DS 1911s |
| Springfield 1911 DS Prodigy (4.25in) | Springfield 1911 DS Prodigy 4.25in AOS Springfield 1911 DS Prodigy 5.0in AOS* | Other DS 1911s |
| Staccato 2011 | Staccato 2011 C2, Staccato 2011 P May fit some 2011 builds from other makers** | Staccato 2011 CS, Staccato 2011 Full Rail (XC) Cosaint Cos21 |
| Staccato 2011 Full Rail | Staccato 2011 Full Rail (XC) Staccato 2011 C2, Staccato 2011 P May fit some 2011 builds from other makers** | Cosaint Cos21 |
| Staccato HD | Staccato HD P4 | Non HD Staccatos and other 2011s |
| Walther PDP 4.0in | Walther PDP 4.0in Walther PDP-F Walther PDP 4.5in* | PDP Metal Frame PPQ PPQ M2 |
| Walther PDP 4.5in | Walther PDP 4.5in Walther PDP 4.0in Walther PDP-F | PDP Metal Frame PPQ PPQ M2 |
| *These models will safely and securely fit, but the slide will extend beyond the end of the holster. **Our Cipher 2011 holsters fit Staccato 2011 pistols, and may fit some 2011 builds from other makers, but compatibility is not guaranteed. |
||
Holster Fit Guide for the Flint & Flint Compact
Flint
| Holster Model | Fits | Does not fit |
|---|---|---|
| Glock® 17/19/26 | G17, G19, G19x, G22 (gen3-4), G23 (gen3-4), G26, G27, G31, G32, G33, G34, G35, G45, G47 | G20 G21 G22 gen5 G23 gen5 G36 G37 G38 G39 G40 G43 G43x G48 Shadow Systems |
| M&P 9/40 1.0, 2.0, and 2.0c | M&P 1.0, M&P 1.0c, M&P 2.0, M&P 2.0c (with or without thumb safety) | Metal framed M&P M&P .45 M&P .45c M&P 2.0 Carry Comp |
| M&P Shield 9/40 1.0 or 2.0 (AND SHIELD PLUS) | Shield 1.0 in, 9mm/.40S&w Shield 2.0 (with or without thumb safety), Shield Plus 3.1in or 4.0in, (with or without thumb safety) | Any Shield w/ integrated laser |
| CZ P10c | CZ P10c, CZ P10s, CZ P10sc, CZ P10f (muzzle will extend beyond the holster) | Any metal framed CZ P01 Shadow 2, etc |
Flint Compact
| Holster Model | Fits | Does not fit |
|---|---|---|
| Glock® 48/43x/43/MOS | G43, G43x, G43x MOS, G48, G48 MOS | G42, G36, Shadow Systems, Polymer 80 |
| Sig P365/P365XL/P365X (*NOT P365 .380 or P365X Macro*) | P365, P365X, P365XL, P365 SAS, P365XL Comp Rose, P365XL Spectre Comp, Wilson Combat P365 and P365XL Grip modules | P365 .380, P365X-Macro, P322, Icarus Precision, Mischief Machine |
Holster Fit Guide for the Spark
| Holster Model | Fits | Does not fit |
|---|---|---|
| Glock® 17/19/34 w/ X300U A/B or X300T | G17, G19, G19x, G22 (gen3-4), G23 (gen3-4), G31, G32, G33, G34, G35, G45 or Shadow Systems, G47 w/ Surefire X300Ultra A/B, or X300Turbo A/B | G20, G21, G22 gen5, G23 gen5, G26, G27, G36, G37, G38, G39, G40, G43, G43x, G48, Polymer 80, X300, X300V, X400U, XH35 |
| Glock® 17/19/34 w/ TLR-1 or TLR-1 HL | G17, G19, G19x, G22 (gen3-4), G23 (gen3-4), G31, G32, G33, G34, G35, G45 or Shadow Systems, G47 w/ Streamlight TLR-1, TLR-1s or TLR-1 HL | G20, G21, G22 gen5, G23 gen5, G26, G27, G36, G37, G38, G39, G40, G43, G43x, G48, Polymer 80, TLR-2, TLR-2 HL |
| Glock® 17/19 w/ TLR-7 or TLR-7A | G17, G19, G19x, G22 (gen3-4), G23 (gen3-4), G31, G32, G33, G34, G35, G45 or Shadow Systems, G47 w/ Streamlight TLR-7, TLR-7A or TLR-7X | G20, G21, G22 gen5, G23 gen5, G26, G27, G36, G37, G38, G39, G40, G43, G43x, G48, Polymer 80, TLR-7 Sub, TLR-7 HLX, TLR-8, TLR-8ag, TLR-8 Sub, TLR-9 |
| FN 509 TLR-7 or TLR-7A | Fn 509 Tactical, FN 509 Full Size, FN 509 Midsize, FN 509 LS Edge, FN 509 Edge CC, FN 509 Compact, FN 509 Compact MRD, FN 509 Compact Tactical w/ TLR-7, TLR-7A or TLR-7X | FN 502, FN 503, FN 510, FN 545, FNX-9, FNX-45, FN Five-Seven, TLR-7 Sub, TLR-7 HLX, TLR-8, TLR-8ag, TLR-8 Sub, TLR-9 |
Chris (verified owner) –
Been using a ckk membrane former for about a year, just started using my Henry former and it was a total game changer. Significantly improved definition and much shorter cool down time on the kydex. Simple and easy to use. My only issue is that it came with 3/4″ push fittings, and I had to purchase a reducer because my vacuum pump had a 1/4″ outlet. No big deal, very plug and play. Would recommend to any bender wanting to step up their game from a foam press or membrane vacuum press.
Ron P (verified owner) –
freakin awesome way to get into vac molding without either having to build your own table or breaking the bank. I actually love this vac table haha the plug and play is the best part too. No headaches.